Features:

• Multi-Call wireless
• Toll restriction
• Automatic route selection (ARS)
• Caller ID capable with KX-TAW84893 card
• Voice mail integration (with KX-TVA50 or KX-TVA200)
• Direct inward system access (DISA)
• MOH port
• Paging port
• RS232 port for SMDR
• USB port
• SD storage card included
• Powerfail operation: Ports 1 and 2 of the pre-installed CO card are connected to ports 1 and 2 of the pre-installed station card for use by SLT (single line telephones)
• The PBX supports all of the following Panasonic phones
  • KX-T7000 series:
  • Analog proprietary telephones (e.g., KX-T7730)
  • Portable stations (e.g., KX-TD7684)
  • DSS consoles (e.g., KX-T7740)
• PC-Based programming option requirements
  • Microsoft® Windows® 98 SE, Windows Me, Windows 2000, or Windows XP
  • RAM: At least 64 MB of available RAM (128 MB recommended)
  • Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of additional space for user files

Features:

• Maximum 4 per system
• Supports up to 28 handsets (KX-TD7690 or KX-TD7680)
• Maximum of 2 simultaneous conversations per cell station
• Cell stations must be placed 50 feet away from each other
• Uses 2.4GHz frequency
• Up to 197 ft range (depends on environment)

Wireless LAN Installation Notes:

When installing a Multi-cell Wireless application in a site that is using an 802.11b Wireless Local Area Network (WLAN), the Panasonic Cell Stations should be located as far apart as possible from the WLAN Access Points (AP). This is done to avoid reducing the throughput of the Wireless Local Area Network WLAN. Most Important, it is recommended that the access Points utilize channel 9 when possible. The separation distance between Cell Stations should always be a minimum of 15 to 40 feet.